Mondraker Prime 29, SRAM, model 2019, black
Fork: RockShox Judy S TK 29 Solo Air Boost tapered, 120mm travel
Head composition: Onoff Saturn ACB Bearings integrated tapered 1-1 / 8
Stem: Onoff Stoic FG 30mm, 6061 forged alloy, 31.8mm barbore
Handlebars: Mondraker custom design 0.5, width 760mm
Grips: Onoff Diamond, 1lock-on, 130mm
Seatpost : Onoff Dropper Pija internal 1x lever
Saddle: Mondraker E-mtb custom design
Front brake: SRAM Level T, rotor 203 mm
Rear brake: SRAM Level T, rotor 203 mm
Brake levers: SRAM Level T, rotor 180 mm
Rims: DT Swiss H1900 Spline 29, 30mm internal width, tubeless ready, 28 spokes
Tip: DT Hybrid SP, straight pull
Front hub: DT 370, 15x110mm, IS 6 bolts
Rear hub: DT 370, 12x148mm, IS 6 bolts
Front tire: Kenda Nevegal Pro II 29x2.4
Rear tire: Kenda Nevegal Pro II 29x2.4
Cranks: Bosch Performance Line CX system, PowerTube battery 500Wh, Purion on-board computer, Miranda Delta ebike crankset, 170mm
Converters: MDK 16T, narrow-wide, 6mm offset
Chain: SRAM PC-1031, 10s
Derailleur: SRAM GX, long cage, 10s, X-actuation 1: 1
Gearing: SRAM Trigger X5, 10s, X-Actuation 1: 1
Cassette: Sunrace CSMS2, 11-42T, 10p
Model year | 2019 |
Gears | 1x10 |
Groupset | SRAM GX |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 79593 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews