Levit Muan MX 3 29 electric bike, 630 Wh, black pearl
Levit Muan MX 3 29 electric bike
Drive |
Bafang M400
|
Battery |
Levit SP2.1 630 Wh (17.5 Ah)
|
Charger |
Leviticus 4A
|
Display |
Color TFT Bafang C18
|
Frame |
Alloy 6061
|
Fork |
RST Gila TnL (100 mm, with crown lock)
|
Derailleur |
Microshift RD-M46L
|
Cassette |
S-Ride M300 (11 - 36T)
|
Chain |
KMC X9
|
Brakes |
Zoom HB-875 (180 mm disc)
|
Rims |
Remerx Rocky Disc (622 x 22 mm)
|
Hubs |
front - Formula DC-20LW; rear - Formula DC-22LW
|
Tires |
CST Gaballero 29 x 2.25" (57 - 622)
|
Seat post |
Spec Phase 30.9 x 400 mm
|
Saddle |
Spec Sport
|
Stem |
Spec Phase 60mm (17"), 80mm (19", 21")
|
Handlebars |
Spec Phase 31.8 x 720 mm (17"), 740 mm (19", 21")
|
Headset |
Spec (semi-integrated, dia. bearings)
|
Pedals |
ALLOY
|
Range |
up to 150 km (90 km off-road)
|
Shift levers |
Microshift Marvo-LT
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x9 |
Groupset | microSHIFT Marvo |
Colour | black pearl |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bafang |
Battery | 630 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 154900 |
Size | Rider height (cm) |
---|---|
S (16") | 150 - 165 |
M (18") | 165 - 175 |
L (19") | 175 - 185 |
XL (21") | 185 - 195 |
XXL (23") | 195 - 205 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews