Kellys Tygon R90 29 "720Wh, model 2021
Frame size: M / L / XL
Motor: SHIMANO STEPS E7000, 36V
Bicycle computer: SHIMANO SC-E5000 cycle computer with assist switch
Battery: KELLYS Re-Charge V10 Li-ion internal removable 720Wh / capacity 20Ah, powered by BMZ
Fork: ROCK SHOX Recon Gold RL (29) Boost, 120mm, DebonAir / Motion Control / Maxle Stealth 15mm thru axle
Hlav. composition: FSA 1.5 semi-integrated
Cranks: SHIMANO E6100 (36T) - length 170mm
Gear: SHIMANO Deore (021) SL-M6100-IR Rapidfire Plus (I-Spec EV)
Converter : SHIMANO SLX M7100 (direct mount)
Number of transfers: 12
Cassette pinion: SHIMANO (021) CS-M6100-12 (10-51T)
Chain: SHIMANO (021) CN-M6100 (122 articles)
Brakes: SHIMANO Deore (021) MT410 Hydraulic Disc
Brake discs: front 180mm / rear 180mm
Brake levers: SHIMANO Deore (021) BL-M4100
Hubs: SHIMANO MT400-B / Deore MT410-B Disc Center Lock (15x110mm / 12x148mm / 32 holes)
Fixed front axle ROCK SHOX Maxle Stealth 15x110mm / rear NOVATEC 12x148mm
Rims: KLS Valor 3 Disc 622x30 (32 holes)
Thread: stainless steel black
Tires : SCHWALBE Nobby Nic Performance 60-622 (29x2.35) ADDIX
Stem: KLS Active - diam 28.6mm / bar bore 31.8mm / 6 ° / length 80mm
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 720mm
Handles: KLS Poison OneLockon
Seatpost : EXAform JAG1 Remote Telescopic - diam 30.9mm / length 485mm, stroke 150mm
Saddle: SELLE ROYAL Vivo
Pedals: plastic
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Material | aluminium |
Drive | Shimano STePS E7000 |
Battery | 720 Wh |
Brakes | Hydraulic disc brakes |
product ID | 124625 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews