Kellys Tygon 10 29 ", model 2020, red
Power unit: PANASONIC GX0, 90Nm, 36V
Display: PANASONIC center LCD
Battery: KELLYS Re-Charge Li-ion internal 504Wh / capacity 14Ah
Fork: SR SUNTOUR XCM32 (29) Boost, 120mm, coil spring, 15mm thru axle
Head composition: FSA 1.5 integrated
Cranks: SAMOX (34) - length 170mm
Gear: SHIMANO Altus SL-M2000 Rapidfire Plus
Number of transfers: 1x9
Derailleur: SHIMANO Altus M2000 (direct mount)
Cassette: SHIMANO CS-HG400-9 (11-36T)
Chain: KMC X9 (118 articles)
Brakes: SHIMANO MT200 Hydraulic Disc
Wheels: front 180mm / rear 180mm
Brake levers: SHIMANO BL-MT200
Hubs: SHIMANO MT400-B Disc Center Lock (32 holes)
Fixed axle: front SR SUNTOUR 15x110mm / rear NOVATEC 12x148mm
Rims: KLS Draft Disc 622x21 (32 holes)
Thread: stainless steel black
Tires : SCHWALBE Rapid Rob 57x622 (29x2.25)
Stem: KLS Active - diam 28.6mm / bar bore 31.8mm / 8 ° / length 75mm
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 660mm (M), 680mm (L - XL)
Grips: KLS Advancer
Seatpost: KLS Active - diam 30.9mm / length 300mm (M), 350mm (L - XL)
Saddle: KLS Sentinel 2
Pedals: plastic
Weight: 22.30 kg (size M)
Model year | 2020 |
Gears | 1x9 |
Groupset | Shimano Altus |
Material | aluminium |
Drive | Panasonic GX0 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 89561 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews