GT e-Pantera Current, model 2020
Fork: SR Suntour XCM32-DS, 120mm, 110 × 15, Coil with preload adjust, 51mm offset
Power unit: Shimano STEPS DU-E7000 250W
Control unit: Shimano SC-E7000 Cycle Computer
Battery: Shimano STEPS BT-E8035, 504Wh
Charger: Shimano EC-E6000-1
Cranks: Shimano FC-E8000, 165mm, X-Sync, 34t
Derailleur: Shimano Alivio
Gear: Shimano Altus, 9-speed
Cassette: Shimano HG200 11-36, 9-speed
Chain: Shimano HG93, 9-speed
Rims: WTB STX i29 TCS, 32h, tubeless ready
Tires : Schwalbe Nobby Nic Peformance, 29 x 2.35 ″, Addix Compound, tubeless readySchwalbe Nobby Nic Peformance, 29 x 2.35 ″, Addix Compound, tubeless ready
Hubs: Shimano MT400, 15x110Shimano MT400, 12 × 148
Spikes: Stainless Steel, 14g
Brakes: Shimano MT200 hydro disc, 180 / 180mm RT10 rotors
Brake levers: Shimano MT200 hydro disc
Handlebars: All Terra Riser, 6061 alloy, 15mm rise, 8 ° sweep, 4 ° rise, 780mm width
Stem: GT All Terra, 6061 Alloy, 31.8, 7 °
Grips: GT Statement Logo
Head composition: Sealed, Semi-integrated
Saddle: WTB Silverado Sport, steel rails
Seatpost: All Terra, 6061 alloy, 0mm offset, 30.9, 350mm (XS-M), 400mm (L-XL)
Model year | 2020 |
Gears | 1x9 |
Groupset | Shimano Alivio, Shimano Altus |
Material | aluminium |
Drive | Shimano STePS E7000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 100615 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews