Ghost HybRide HTX 2.7+, model 2020, red
Fork: SR Suntour XCM 34 LO DS 120 mm
Derailleur: Shimano Altus RD-M2000 9-S
Gear: Shimano Altus SL-M2010
Brakes: Shimano BR-MT200 2/2 Piston 180 mm Disc
Cranks: Ground Fiftyone 32T
Cassette: Shimano CS-HG-200-9 11-36
Handlebars: XLC 720 mm Rise 15 mm Dia. 31.8 mm
Stem: XLC MTB Dia. 31.8 mm
Seatpost: GHOST SP-DC1 31.6 mm
Saddle: DDK 2373A
Front hub: Shimano HB-MT400-B 15 x 110 mm
Rear hub: Shimano FH-MT400-B 12 x 148 mm
Front rim: Rodi Tryp 584x30 mm 32H
Rear rim: Rodi Tryp 584x30 mm 32H
Front tire: WTB Ranger 27.5 x 2.6
Rear tire: WTB Ranger 27.5 x 2.6
Battery: Yamaha InTube 500Wh
Display: Yamaha Display A
Engine: Yamaha PW-ST
Charger: Yamaha Charger
Model year | 2020 |
Gears | 1x9 |
Groupset | Shimano Altus |
Material | aluminium |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 95532 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews