Ghost HYB Lector S6.7+ ELC grey/red/white, model 2019
Wheel size: 27.5"
Frame: HYBRID LECTOR LC
Fork: RockShox Pike RC Debon Air 120 mm
Derailleur: SRAM EX1 8-S
Cranks: Ground Fiftyone 34T
Cassette: SRAM XG 899 11-48
Brakes: SRAM Guide RE 4/4 Piston 200/180 mm Disc
Shifting: SRAM EX1
Head composition: 16012
Handlebars: Ground Fiftyone Race 760 mm Rise 20 mm Dia. 35 mm
Star: Ground Fiftyone Team Dia. 35 mm
Seat post: Kind Shock LEV Integra 31.6 mm
Saddle: Fizik Antares R7
Splined wheels: DT Swiss H 1700 Spline 30 mm Wheelset 15x110 mm // DT Swiss H 1700 Spline 35 mm Wheelset 12x148 mm
Front stroke: 120 mm
Motor: Shimano DU-E8000
Foot: FRHG0021
Number of speeds: 8
Front tire: Maxxis Ardent 3C MaxxTerra Exo 29x2.35
Rear tire: Maxxis REKON 3C MaxxTerra Exo 27.5x2.8
Battery: Shimano BT-E8010 504 Wh
Display: Shimano SC-E8000
Model year | 2019 |
Gears | 1x8 |
Groupset | SRAM EX1 |
Material | carbon fiber |
Drive | Shimano STePS E8000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 43599 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews