Focus Jarifa 2 EX 2018 electric bicycle red
Frame: 6061 aluminum, international disc brake standard
Fork: SR Suntour XCM RL, 9 mm QR, coil spring, remote, 100 mm travel
Engine: Bosch Performance CX, 75 Nm
Battery type: Bosch Powerpack, 400 Wh, removeable
Display: Bosch Purion with Control panel, walk assist
Middle composition: FSA, 20T
Gear levers: Shimano Deore 6000
Cassette: Shimano HG400 9S, 12-36T
Derailleur: Shimano Deore 591, 9-speed
Rims: Rodi Tryp 25, 662-25 mm
Hubs: Shimano Deore, 9 mm QR / 9 mm QR
Brakes: Shimano M315, 180 mm / 160 mm
Stem: Aluminum (31.8 / 90 mm)
Handlebars: Aluminum riserbar (31.8 / 700 mm)
Brake Levers: Shimano M315
Tires: Continental X-King (29x2.4 ")
Saddle: Focus Sport Saddle
Seatpost: Sport Components SP-DC1 (27.2 / 50 mm)
Color: Red
Model year | 2018 |
Gears | 1x9 |
Drive | Bosch Performance CX |
Battery | 400 Wh |
product ID | 77099 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews