Apache Hupahu 3 29 electric bike, red
Apache Hupahu 3 29 electric bike
Drive |
BOSCH PF CX Gen. 4 (85Nm)
|
Battery |
Bosch 625 Wh
|
Display |
Bosch Kiox 300
|
Frame |
Apache Hupahu Bosch AL
|
Fork |
Suntour SR Axon 34 RL-RC
|
Shifting |
Shimano Deore M6100
|
Derailleur |
Shimano XT M8100
|
Cassette |
Shimano Deore M6100
|
Cranks |
FSA Bosch 170mm 34T
|
Brakes |
Shimano MT520
|
Rims |
Remerx e-Rocky RX 3025
|
Hubs |
(F) Shimano MT410, (R) Shimano MT510
|
Seat post |
30.9 x 400mm
|
Stem |
31.8 x 60mm
|
Handlebars |
31.8 x 780mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano Deore |
Colour | red |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
product ID | 203880 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews