Mondraker Prime 29 e-bike, nimbus grey/bronze/vortex grey
Mondraker Prime 29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Bosch Performance Line CX Cruise (25 Km/h) GEN4 Smart System
|
Battery |
Bosch Powertube 625 Wh
|
Display |
Bosch Intuvia 100 / Bosch Mini Remote / Bosch System Controller
|
Frame |
Prime Xtralite 6061 Full Butted Alloy, Forward Geometry, internal removable battery, tapered head tube, Boost 12x148 mm rear axle, integrated dropout speed sensor
|
Fork |
RockShox Recon Silver RL 29, 120 mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110 mm axle, 32 mm steel stanchions, 42 mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload
|
Shifting |
SRAM Trigger SX Eagle, 12s, X-Actuation 1:1, single click
|
Derailleur |
SRAM SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
|
Cassette |
SRAM PG-1210, 11-50T, 12s
|
Chain |
SRAM SX Eagle, 12s, Powerlock
|
Cranks |
Race Face Aeffect ebike, 165 mm, Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
|
Brakes |
SRAM Level T, 2 piece caliper, Centerline 200 mm/180 mm IS 6 bolts one-piece rotor, steel-backed organic pad
|
Brake levers |
Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings
|
Rims |
Mavic E-CrossRide 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratched system, IS 6 bolts, HG freehub
|
Spokes |
Mavic J-bend double butted, contactless lacing
|
Front tyre |
Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
|
Rear tyre |
Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
|
Seat post |
Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6mm, length 400 mm
|
Saddle |
MDK ebike black
|
Stem |
Onoff Sulfur FG 30 mm 0°, 6061 forged alloy, 31.8 mm barbore
|
Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20 mm, width: 800 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore
|
Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | Other |
Colour | nimbus grey/bronze/vortex grey |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Telescopic seat post | no |
product ID | 254332 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews