Marin Alpine Trail E 29/27.5 e-bike, blue/black
Choose personal collection at the store and decide on the spot.
Marin Alpine Trail E 29/27.5 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Shimano EP6, 250 W, 85 Nm
|
Battery |
BT-8035L, Internal 504 Wh
|
Display |
SC-E600 Display
|
Frame |
Series 4 Alloy Frame, 150 mm Multitrac Suspension, Integrated Battery/Charging Port, 148 mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
Fork |
X-Fusion Trace 36 RC, 160 mm Travel, 29", 110x15 mm Bolt-On Axle, 44 mm Offset
|
Shock |
X-Fusion 02 PRO RXC, Compression and Rebound Adjustment, Custom Tune, 205x65mm Trunnion Upper Mount, 25xM8 Lower Mount
|
Shifting |
Shimano Deore, 10-Speed, I Spec EV
|
Derailleur |
Shimano Deore, 10-Speed
|
Cassette |
Shimano Deore 10-speed 11-46T
|
Chain |
KMC X-10E, Silver
|
Cranks |
Shimano EM600, 160mm Length
|
Brakes |
F: Shimano MT420, 4-Piston Hydraulic Disc Brake, Metallic Pads, 203 mm Rotor
R: Shimano MT420, 4-Piston Hydraulic Disc Brake, Metallic Pads, 203 mm Rotor w/ Speed Sensor |
Rims |
F: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, TLR
R: Marin Aluminum Double Wall, 27.5" Diameter, 38 mm Inner Rim Width, Pinned Joint, TLR |
Hubs |
F: Shimano MT-410B, 110x15 mm, centerlock Disc, 32H
R: Shimano HB-MT400B, 148x12 mm, Centerlock, Standard Freehub Body |
Spokes |
14g Black Stainless Steel
|
Tires |
F: Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible
R: Vee Tire Co Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible |
Seat post |
TranzX, YSP18JL, 1x Remote, Size S: 150 mm Travel, All Other Sizes: 170 mm Travel, 30.9 mm
|
Saddle |
Marin E-MTB Saddle
|
Stem |
Marin 3D Forged Alloy, 35 mm
|
Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminium, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
Grips |
Marin Grizzly Lock On
|
Headset |
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2"
|
Pedals |
Marin MTB Plastic
|
Switch |
SW-EN600L Left Hand Switch for Assist Mode Change
|
Extra |
Shimano CS-EM800 Chain Guide
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x10 |
Groupset | Shimano Deore |
Size | S, M, L, XL |
Colour | blue/black |
Material | aluminium |
Wheel diameter | front: 29"/rear 27.5" |
Drive | Shimano STePS EP6 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 231534 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews