Lapierre Overvolt HT 8.6 29 e-bike, gray
Similar products
Lapierre Overvolt HT 8.6 29 electric bike
Hardtail, which is the gateway between Lapierre electric bikes. 120 mm of front travel provides natural balance and great cornering control, as well as effective damping of terrain irregularities. The proven Yamaha engine ensures comfortable assistance with a smooth start. The Overvolt HT is an affordable e-bike perfect for weekend rides.Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
Engine Yamaha PW-ST 70 Nm
|
Battery |
InTube 630 Wh
|
Frame |
OVERVOLT YAMAHA SUPREME 5 ALLOY
|
Fork |
SR Suntour XCR 34 Air LO 15x110 29" 120 mm travel
|
Shifting |
Shimano Deore M5100 11s
|
Derailleur |
Shimano Deore RD-M5100, 11-S Shadow +
|
Cassette |
Shimano CS-M5100 11spd 11-51T
|
Chain |
KMC e11 Sport Silver - black 11s
|
Cranks |
Lapierre Overvolt 170 mm, 34T narrow wide
|
Brakes |
Shimano M4100 hydraulic brakes
|
Rims |
Rodi Tryp 30 tubeless ready, 30-622 (29") 32H / Rodi Tryp 30 tubeless ready, 30-622 (29") 32H
|
Hubs |
DA210, boost 15x110, 32H 6 center lock / DA210, 4 sealed bearings, boost 12x148, 32H center lock
|
Front tire |
WTB Ranger 2.6x29"
|
Rear tire |
WTB Ranger 2.6x29"
|
Seat post |
Lapierre dropper, travel: 80 mm (S), 100 mm (M / L / XL)
|
Saddle |
Selle Royal Vivo Sport Men (145 mm)
|
Stem |
Lapierre alloy, Ø: 31.8 mm, L: 50 mm
|
Handlebars |
Lapierre Alloy 6061 DB, Width: 740 mm, Rise: 15 mm, Ø: 31.8 mm
|
Grips |
Velo ergo Lock-on
|
Pedals |
XLC by VP
|
Number of speeds |
1x11
|
Sex | Men, Unisex |
Battery | 630 Wh |
Drive | Yamaha |
Model year | 2022 |
Groupset | Shimano Deore |
Gears | 1x11 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 120 mm |
Material | aluminium |
Colour | grey |
Fork | Air |
product ID | 151068 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews