Kellys Tygon R10 29 e-bike, grey
Choose personal collection at the store and decide on the spot.
Kellys Tygon R10 29 electric bicycle
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
Drive |
PANASONIC GX Ultimate, 90 Nm, 36 V
|
Battery |
KELLYS Re-Charge Li-ion internal 720 Wh / capacity 20 Ah
|
Cycle computer |
PANASONIC center LCD
|
Frame |
KELLYS TYGON R series - advanced robotic welded 6-series aluminum alloy, integrated removable battery, 1.5“ tapered HT, 12x148 mm Boost thru axle / Made in EU
|
Fork |
SR SUNTOUR XCM32 (29) Boost, 120 mm, coil spring / 15 mm thru axle
|
Shifting |
SHIMANO Altus SL-M2000 Rapidfire Plus
|
Derailleur |
Shimano Altus M2000, direct mount
|
Cassette |
Shimano CS-HG400-9, 11-36T
|
Chain |
KMC e9S (118 articles)
|
Cranks |
SAMOX (34), 170 mm
|
Brakes |
Shimano MT200 Hydraulic Disc 180 mm / 180 mm
|
Brake levers |
Shimano BL-MT200
|
Rims |
KLS Draft Disc 622x21, 32H
|
Hubs |
Shimano MT400-B Disc Center Lock, 32H
|
Spokes |
stainless steel black
|
Tires |
MICHELIN Country Race´r 29x2.10"
|
Seat post |
KLS Active, Ø 30.9 mm, length 350 mm
|
Saddle |
Selle Royal Vivo
|
Stem |
KLS Alm/En 50, Ø 28.6 mm, bar bore 31.8 mm, length 60 mm
|
Handlebars |
KLS Active RiseBar, Ø 31.8 mm, rise 18 mm, width 720 mm
|
Grips |
KLS Poison OneLockon
|
Headset |
FSA 1.5 semi-integrated
|
Pedals |
plastic
|
Gear shift unit |
PANASONIC gear shifter button
|
Sex | Men, Unisex |
Battery | 720 Wh |
Drive | Panasonic GX Ultimate |
Model year | 2022 |
Groupset | Shimano Altus |
Gears | 1x9 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 120 mm |
Material | aluminium |
Colour | grey |
Fork | Spring |
product ID | 177499 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews