Kellys Estima 60 27.5 women's electric bike, gold
Kellys Estima 60 27.5 women's electric bike
Drive |
SHIMANO EP6, 85 Nm, 36 V
|
Battery |
KELLYS Re-Charge V10 Li-ion internal removable 725 Wh / capacity 20 Ah, powered by BMZ
|
Cycling computer |
SHIMANO SC-EN500 cycle computer with assist switch
|
Frame |
KELLYS ESTIMA series - advanced robotic welded 6-series aluminum alloy / Designed & manufactured in EUROPE / integrated removable battery, 1.5“ tapered HT
|
Fork |
RockShox Recon Silver TK (27.5") Boost, 100 mm, coil / TurnKey / Maxle Stealth 15 mm thru axle
|
Shifting |
SHIMANO Nexus SL-C7000-5 Revoshift
|
Chain |
SHIMANO CN-HG71 (108 articles)
|
Cranks |
Shimano EM600 / CR-ET600 (38T) - length 170 mm
|
Brakes |
SHIMANO MT200 hydraulic disc, 180 mm/180 mm
|
Rims |
KLS Valor 3 Disc 584x30 (32 holes)
|
Hubs |
SHIMANO MT400-B / SHIMANO Nexus C7000-5D Disc Center Lock (32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE Super Moto-X Performance 27.5x2.40" SnakeSkin, GreenGuard, ReflectiveLine
|
Seat post |
sprung KALLOY - diam 30.9 mm / length 300 mm (S), 350 mm (M)
|
Saddle |
Selle Royal Freedom Royalgel
|
Stem |
adjustable PROMAX a-head - diam 28.6 mm / bar bore 31.8 mm / length 85 mm
|
Handlebars |
KALLOY RiseBar - diam 31.8 mm / width 640 mm
|
Grips |
KLS Wave 2Density ergonomic
|
Headset |
FSA 1.5 semi-integrated
|
Pedals |
plastic
|
Mudguards |
plastic
|
Pinion |
for internal hub Nexus 24T
|
Front light |
TRELOCK Veo 50
|
Rear light |
TRELOCK Duo Flat
|
Accessories |
carrier, adjustable stand, bell
|
Sex | Women |
Model year | 2023 |
Gears | 1x5 |
Groupset | Shimano RevoShift |
Size | S, M |
Colour | gold |
Material | aluminium |
Wheel diameter | 27.5" |
Drive | Shimano STePS EP6 |
Battery | 725 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
product ID | 224296 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews