Kellys E-Carson 10 SH 28 electric bike, teal
Kellys E-Carson 10 SH 28 electric bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, gravel and paved roads and during your weekend activities. If you ride more frequently, expect more regular fine-tuning.
Drive |
Shimano STePS E5000, 36 V
|
Battery |
Shimano BT-E8010, 504 Wh / capacity 14 Ah
|
Cycling computer |
Shimano SC-E5000 cycle computer with assist switch
|
Frame |
KELLYS E-CARSON R series - advanced robotic welded 6-series aluminum alloy, integrated removable battery, 1.5" tapered HT / Made in EU
|
Fork |
SR Suntour NVX30 UFO (29), 100 mm, coil spring
|
Shifting |
Shimano Altus SL-M2000 Rapidfire Plus
|
Derailleur |
Shimano Altus M2000, direct mount
|
Cassette |
Shimano CS-HG201-9, 11-36T
|
Chain |
KMC e9S (118 articles)
|
Cranks |
Shimano E5000, 38T, 175mm
|
Brakes |
Shimano MT200 Hydraulic Disc 160 mm/160 mm
|
Rims |
KLS Draft Disc 622x21, 32H
|
Hubs |
Shimano TX505 Disc Center Lock, 32H
|
Spokes |
stainless steel black
|
Tires |
MICHELIN Protec BR 28x1.75" ReflectiveLine
|
Seat post |
KLS Active, Ø 30.9 mm, length 350 mm
|
Saddle |
Selle Royal Vivo
|
Stem |
adjustable PROMAX a-head, Ø 28.6 mm, bar bore 31.8 mm, length 105 mm
|
Handlebars |
KALLOY RiseBar, Ø 31.8 mm, width 640 mm
|
Grips |
KLS Wave 2Density ergonomic
|
Headset |
FSA 1.5 semi-integrated
|
Pedals |
plastic
|
Front light |
AXA Compactline 35
|
Rear light |
TRELOCK Duo Flat
|
Accessories |
aluminum alloy carrier, adjustable stand, bell, plastic fenders
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x9 |
Groupset | Shimano Altus |
Size | M, L |
Colour | teal |
Material | aluminium |
Wheel diameter | 28" |
Drive | Shimano STePS E5000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 177428 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews