FELT Sport-e 30 EQ women's black, model 2019
Fork: SR Suntour SF14-NCX D DS LO CTS, air, hydraulic lockout
Stroke: 63 mm
Shifting: Shimano SLX, 11 speeds
Derailleur: Shimano XT
Cassette: Shimano SLX, 11 speeds, 11-40 teeth
Cranks: Shimano E8000, (44cm - 170mm, 48/58cm - 175mm)
Headstock: FSA No.42, 1.125"-1.5", integrated
Stem: Felt QX, 1.125", (44cm - 70mm, 48cm - 80mm, 52cm - 90mm, 55cm - 100mm, 58cm - 110mm)
Handlebars: Felt QX, (44/48cm - 620mm, 52/58cm - 64mm)
Brakes: Shimano Deore M6000
Wheels: Alexrims MD19
Tires: Schwalbe EnergizerLife, 700x35c
Seatpost: Felt, Alu 6061, 27.2mm x 300mm
Seat: Felt QX Motor: Shimano e8000 drive, 250W
Battery: Shimano 500Wh
Gears | 1x11 |
Drive | Shimano STePS E8000 |
Battery | 500 Wh |
product ID | 77483 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews