Fuji Touring DARK BLUE, model 2019
Fork: Chromoly w/ 1 1/8"" steerer, low-rider water bottle and rack mounts
Cranks: Shimano Alivio, 48/36/26T
Center composition: Shimano BB-SM52 sealed cartridge
Pedals: Touring w/ clips & straps
Derailleur: Shimano Alivio, 28.6mm clamp
Derailleur: Shimano Deore, 9-Speed
Shifting: Microshift bar-end, 9-speed
Cassette: Shimano Alivio, 11-34T, 9-speed
Chain: KMC X9
Wheels: Vera Terra DPM18, double wall, 36/36h, Shimano Deore hubs
Tires: Vittoria Randonneur, 700 x 35c, 30tpi
Brakes: Shimano T4010 linear pull
Brake levers: Tektro RL520
Head composition: FSA, 1 1/8"", sealed
Handlebars: Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4 degree sweep
Stem: Alloy, 3D-forged 6061 stem body, +/-7 degree
Saddle: Oval Concepts 344, steel rail
Seatpost: 6061 alloy, 27.2mm diameter
Weight: 13.41 kg / 29.56 lbs
Model year | 2019 |
Gears | 3x9 |
Groupset | Shimano Deore, Shimano Alivio |
Material | aluminium |
Brakes | V-brakes |
product ID | 78203 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews