Wilier road bike CENTO10 SL DISC 105 RS170 2021
Fork: CARBON MONOCOQUE NH-MOD
Wheels: Shimano RS 170
Cranks: SHIMANO 105 FC-R7000 50-34T
Cassette: SHIMANO 105 CS-R7000 11-30T
Gearing : SHIMANO 105 ST-R7020
Derailleur: SHIMANO 105 FD-R7000
SHIMANO 105 RD-R7000-SS
Chain: SHIMANO CN-HG600-11
Tires : Vittoria Zaffiro 700X25 MM
Stem: STEMMA SL
Handlebars: BARRA SL
Saddle: SELLE ITALIA X3
Seatpost : CENTO10SL CUSTOM MADE BY RITCHEY
Head composition: WTP-BEARING-SS (UPPER) + MR137 (LOWER)
Rotors: SHIMANO 105 CENTER LOCK SM-RT70 160 MM / 140 MM
Center composition: SHIMANO PRESSFIT SM-BB71-41
Weight: 8.85 kg +/- 5%
Fork weight: 400 g +/- 5%
Model year | 2021 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 121982 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews