Wilier GTR Team 105 RS100
Fork: CARBON MONOCOQUE 46TON
Wheels: SHIMANO RS 100
Cranks: Shimano 105 R7000 50/34T
Cassette: SHIMANO 105, 11S R7000 11/30T
Shifting: SHIMANO 105 R7020 DISC
Derailleur: SHIMANO 105 FD-R7000 11S
Derailleur: SHIMANO 150 RD-R7000 11S
Chain: Shimano 105, 11S
Brakes: SHIMANO 105 R7000
Tyres : VITTORIA ZAFFIRO PRO 4 700X25 MM
Stem: FSA OS-168 - CUSTOM WILIER
Handlebars: FSA OMEGA
Saddle: SELLE ITALIA X1
Seat post : FSA ALU SP148
Head composition: FSA NO.44E tapered 1"1/8 TOP - 1"1/4 BOTTOM
Center composition: SHIMANO 105 PRESS FIT
Fork weight: 390 g +/- 5%
Weight: 8.7 kg +/- 5%
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Brakes | Road rim brakes |
product ID | 106567 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews