Superior X-ROAD TEAM ISSUE Di2 bike, gloss white/hologram black
Similar products
Superior X-ROAD TEAM ISSUE Di2 bike
A road bike for experienced road riders who ride thousands of kilometers in a year. Suitable for regular or demanding training, amateur races and long trips. You can count on great equipment and light weight.
Frame |
Carbon X-Road Race Mid Modulus, Road Advanced Geometry, Disc Brake Flat Mount, BB86.5, SH dropout, Thru Axle 142x12 mm, Inner cable routing, Di2 compatible, mudguards ready.
|
Fork |
X-ROAD carbon fork
|
Shifting |
SHIMANO ULTEGRA R8170, Di2, 12-speed
|
Derailleur |
SHIMANO ULTEGRA RD-R8150, Shadow Design
|
Front derailleur |
SHIMANO ULTEGRA FD-R8150, Down Swing, Brazed-On Type
|
Cassette |
SHIMANO ULTEGRA CS-R8101, 12-speed, 11-34T
|
Chain |
Shimano XT CN-M8100
|
Cranks |
SHIMANO ULTEGRA FC-R8100, Hollowtech II, 50-34T
|
Brakes |
SHIMANO ULTEGRA R8170, hydraulic disc brake
|
Disc brakes |
SHIMANO RT-MT800, 140 mm
|
Wheelset |
DT Swiss ER 1600 SPLINE®, CL, 12x100 mm, 12x142 mm, SH11, Tubeless Ready
|
Wheelset |
DT Swiss ER 1600 SPLINE®, CL, F: 12x100 mm, R: 12x142 mm, SH11, Tubeless Ready
|
Tires |
Schwalbe Pro One Evo, Super Race, V-Guard, 30-622, ADDIX Race
|
Seat post |
ONE Aero Carbon
|
Saddle |
Fizi:k Vento Argo R5, Alloy
|
Handlebars |
ONE Carbon Integrated Cockpit ICR
|
Grips |
ONE Handlebar Tape
|
Headset |
ACROS AIX-525S, ICR, OD56, IS52/28.6 - 40IPS, Stainless Bearings
|
Bottom bracket |
SHIMANO BB-72-41B, PressFit, shell 41x86.5 mm
|
Seatpost clamp |
Frame Integrated Clamp
|
Sex | Men, Unisex |
Model year | 2023 |
Groupset | Shimano XT, Shimano Ultegra |
Gears | 2x12 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 28" |
Material | carbon fiber |
Size | S, M, L, XL |
Colour | gloss white/hologram black |
Fork | Rigid |
Wheel material | Aluminium |
product ID | 227291 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews