Superior X-ROAD TEAM ELITE Di2 bicycle, gloss grey/team red
Superior X-ROAD TEAM ELITE Di2 bicycle
Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding and training. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
Carbon X-Road Race Mid Modulus, Road Advanced Geometry, Disc Brake Flat Mount, BB86.5, SH dropout, Thru Axle 142x12 mm, Inner cable routing, Di2 compatible, mudguards ready.
|
Fork |
X-ROAD carbon fork
|
Shifting |
SHIMANO 105 R7170, Di2, 12-speed
|
Derailleur |
SHIMANO 105 RD-R7150, Shadow Design
|
Derailleur |
SHIMANO 105 FD-R7150, Down Swing, Brazed-On Type
|
Cassette |
SHIMANO 105 CS-R7100, 12 speed, 11-34T
|
Chain |
Shimano XT CN-M8100
|
Cranks |
SHIMANO 105 FC-R7100, Hollowtech II, 50-34T
|
Front brake |
SHIMANO 105 R7170, hydraulic disc brake
|
Rear brake |
SHIMANO 105 R7170, hydraulic disc brake
|
Brake discs |
SHIMANO SM-RT70, 140 mm
|
Wheelset |
DT Swiss C 1800 SPLINE®, CL, 12x100 mm, 12x142 mm, SH11, Tubeless Ready
|
Front tyre |
Schwalbe Pro One Evo, Super Race, V-Guard, 30-622, ADDIX Race
|
Rear tyre |
Schwalbe Pro One Evo, Super Race, V-Guard, 30-622, ADDIX Race
|
Seat post |
ONE Aero Carbon
|
Saddle |
Selle Royal Gravel
|
Stem |
ONE Race ICR, Alloy, 31.8 mm, -7°
|
Handlebars |
ONE Alloy, X-Race Aero, 31.8 mm
|
Bar tape |
ONE Handlebar Tape
|
Headset |
ACROS AIX-525, ICR, OD56, IS52/28.6 - 40IPS
|
Bottom bracket |
SHIMANO BB-RS500PB, PressFit, shell 41x86.5 mm
|
Seatpost clamp |
Frame Integrated Clamp
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 2x12 |
Groupset | Shimano XT, Shimano 105 |
Size | S, M, L, XL |
Colour | gloss grey/team red |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 227294 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews