Superior X-ROAD Comp bike, gloss silver/white metallic
Superior X-ROAD Comp bike
Frame |
Alu X6 Ultralite X-Road Race, Road Advanced Geometry, Smooth Welding, Disc Brake Flat Mount, BB BSA 68 mm, SH dropt, Inner cable routing, mudguards ready
|
Fork |
X-Road Comp 28", Carbon/alloy rigid, Ahead 1-1/8x1.5", 12x100 mm axle
|
Derailleur |
Shimano Tiagra 4700 GS
|
Derailleur |
Shimano Tiagra 4700
|
Cassette |
SHIMANO CS-HG500-10, 11-34T
|
Chain |
KMC X10
|
Cranks |
SHIMANO FC-RS400, 34T
|
Brakes |
SHIMANO ST-4725/BR-4770, hydraulic disc brake
|
Rims |
Stars J20SR, 28H
|
Front hub |
SHIMANO HB-RS470, 28H, CENTER LOCK, 12x100 mm THRU Type AXLE
|
Rear hub |
SHIMANO FH-RS470, 28H, CENTER LOCK, 12x142 mm THRU Type AXLE
|
Tires |
Schwalbe Lugano II KevlarGuard, 700x32C
|
Seat post |
ONE1 Race Alloy, SP C255, 27.2 mm
|
Saddle |
Fizik Aliante R5
|
Stem |
ONE1 Race RAS-D62938 Alloy, 31.8 mm, -8°
|
Handlebars |
ONE1 Alloy, X-Race Aero, 16 ° flared, 70 mm reach, 31.8 mm
|
Grips |
Velo VLF-8111
|
Headset |
CHS0820 FIT8 1-1/8", IS42/28.6 | IS52/40 / Head set cover
|
Spokes |
Sapim Race, Stainless Black
|
Model year | 2022 |
Gears | 2x10 |
Groupset | Other |
Size | 52 |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 172682 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
