Superior X-ROAD 6.3 GF bicycle, gloss grey/black
Superior X-ROAD 6.3 GF bicycle
Suitable for riding on roads and cycle paths after work or over the weekend. These bikes have a more comfortable geometry than sports bikes, but they have their limitations when it comes to equipment, which will need more frequent fine-tuning.
Frame |
Alu X6 Ultralite X-Road Race, Road Advanced Geometry, Smooth Welding, Disc Brake Flat mount, BB BSA 68 mm, Integrated Cable Routing, Full Carbon front fork; mudguards ready
|
Fork |
X-ROAD carbon fork
|
Shifting |
Shimano Tiagra R-4720, 2x10-speed
|
Derailleur |
Shimano Tiagra RD-4700
|
Derailleur |
Shimano TIAGRA FD-4700, Brazed-On Type
|
Cassette |
Shimano CS-HG500, 10-speed, 11-34T
|
Chain |
KMC X10
|
Cranks |
Shimano FC-RS400, 50-34T
|
Brakes |
Shimano Tiagra R-4720, hydraulic disc brake
|
Brake discs |
SHIMANO SM-RT70, 140mm/140mm
|
Rims |
STARS J22GT, Disc, 28H
|
Front hub |
SHIMANO HB-RS470, 28H, CL, 12x100 mm, THRU Type AXLE
|
Rear hub |
SHIMANO FH-RS470, 28H, CL, 12x142 mm, THRU Type AXLE
|
Spokes |
Sapim Race, Stainless Black
|
Tires |
Schwalbe Lugano II, KevlarGuard, 32-622
|
Seat post |
ONE Race, Alloy, 27.2 mm
|
Saddle |
Selle Royal SRX, 148 mm
|
Stem |
ONE Race ICR, Alloy, 31.8 mm, -7°
|
Handlebars |
ONE Alloy, X-Race Aero, 31.8 mm, Reach 70 mm, Drop 127 mm, Flare 2°, Backsweep 6°
|
Bar tape |
ONE Handlebar Tape
|
Headset |
Acros AIX-525, ICR, OD56, IS52/28.6 - 40IPS
|
Bottom bracket |
SHIMANO, Cartridge Bearing
|
Nipples |
SAPIM, Brass
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Colour | gloss grey/black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 253300 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews