Pinarello Paris Disk 105 Fulcrum Racing 800DB
Fork: Paris Onda Fork with ForkFlap, Tapered head tube
Crankshafts: Shimano 105 R7000 11S
Derailleur: Shimano 105 R7000 11S
Shimano 105 R7000 11S
Cassette: Shimano 105 R7000 11S
Chain: Shimano CN-HG601 11S
Middle composition: Shimano 105
Front brake: Shimano 105 R7000, 2 caliper pistons, 160mm rotor
Rear brake: Shimano 105 R7000, 2 pistons caliper, 160mm rotor
Handlebars: Jaguar XA Aero Di2
Stem: Tiger Aero Alu TiCR
Grip: MOST ULTRAGRIP evo 3mm BLACK
Saddle: MOST Lynx Aircross FEC Alloy Large 145mm
Seatpost: Pinarello Aero Seatpost with titanium bolts
Tires: Pirelli P7 black 60 tpi Nylon breaker, Max Tire Size 28mm
Wheels: Fulcrum Racing 800
Model year | 2021 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 139123 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews