Orbea AVANT H50, model 2018
Road aluminum bicycle.
Frame: Orbea Avant Hydro, hydroformed triple butted aluminum, headset 1-1 / 8 ", BB 68mm - BSC English, internal cable routing, 130 OLD, 27,2mm seat tube.
Fork: Avant carbon fork, aluminum steerer, 1-1 / 8 "head tube.
Cranks: Shimano Sora 3000 34x50t
Head composition: 1-1 / 8 "Semi-Integrated Aluminum Cup
Orbea OC-II handlebars
Stem: Orbea OC-II
Gear: Shimano Sora
Brakes: Orbea OC-II
Cassette: Shimano HG400 11-32t 9-Speed
Rear derailleur: Shimano Sora 3000GS
Derailleur: Shimano Sora 3000
Chain: Shimano HG53 9-Speed
Wheels: Orbea R1800
Tires : Kenda Criterion 700x25 60TPI
Pedals: N / A
Seatpost: Orbea OC-I 27.2x350mm
Saddle: Prologo K3 STN size 141 mm
Model year | 2018 |
Gears | 2x9 |
Groupset | Shimano Sora |
Material | aluminium |
Brakes | Road rim brakes |
product ID | 72833 |
Road
Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
---|---|---|---|---|---|---|---|
Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews