Lapierre Pulsium SAT 6.0 AXS bicycle, black/yellow
Lapierre Pulsium SAT 6.0 AXS bicycle
Frame |
Pulsium SAT Disc Thru axle UD carbon
|
Derailleur |
SRAM Rival ETAP AXS Max, 12s
|
Derailleur |
SRAM Rival ETAP AXS Braze-On
|
Cassette |
SRAM XG 1250 10-36T 12s
|
Chain |
SRAM Rival 12S
|
Cranks |
SRAM Rival Dub 46-33T 170mm (XS, S), 172.5mm (M, L), 175mm (XL)
|
Brakes |
SRAM Rival disc 160/140 mm
|
Wheels |
DT Swiss ER1600 SPLINE
|
Tires |
SCHWALBE ONE Perf, RaceGuard, MicroSkin, TLE 700x28C
|
Seat post |
Lapierre alloy, Ø: 27.2 mm, L: 350 mm
|
Saddle |
Fizik Aliante R5 150 mm
|
Stem |
Lapierre alloy, internal routing, Ø: 31.8 mm, 80 mm (XS, S), 90 mm (M), 100 mm (L), 110 mm (XL)
|
Handlebars |
Lapierre alloy, Width: 400 mm (XS, S), 420 mm (M, L, XL), Drop: 130 mm, Reach: 80 mm
|
Bar tape |
LAPIERRE TAPE
|
Headset |
Acros AIX-532 IS52/28.6 - IS52/40
|
Bottom bracket |
SRAM DUB Press Fit 86.5 Road
|
Pedals |
VP-335 Clips&Strap
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 2x12 |
Groupset | SRAM Rival |
Size | XS, S, M, L, XL |
Colour | Black/Yellow |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 262991 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
