Lapierre AUDACIO 300 CP, model 2018
Fork: AUDACIO CARBON / ALLOY STEERER
Derailleur: SHIMANO TIAGRA RD-R4700GS, 10s
Derailleur: SHIMANO TIAGRA FD-R4700BM
Cranks: SHIMANO TIAGRA FC-R4700, 50X34T 170mm (XS, S) 172.5mm (M), 175mm (L, XL, XXL)
Middle composition: SHIMANO BB-RS500
Cassette: SHIMANO HG500 10s 11-34T
Chain: SHIMANO HG54
Brakes: SHIMANO TIAGRA BR-R4700
Gearing: SHIMANO TIAGRA ST-4700 2x10s
Head composition: FSA ZS 4D 1.1 / 8 ''
Handlebars: LAPIERRE HB-CR12 40cm (XS) 42cm (S, M, L) 44cm (XL, XXL)
Grip: VELO TAPE
Stem: LAPIERRE AS-LP2 -7 31.8mm 90mm (XS, S) 100mm (M) 110mm (L) 120mm (XL, XXL)
Seatpost: LAPIERRE SP-3D1 27.2 * 350mm
Saddle: SELLE ITALIA X1
Wheels: MAVIC OPEN ELITE / SHIMANO RS400 32H / 2X1.7X2 SPOKES
Tires: CONTINENTAL Ultra Sport 2 SL 700X25
Pedals: VP-335 Clips & Strap
Model year | 2018 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
product ID | 49696 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews