Kellys URC 90 M, model 2018
frame size M (520mm)
fork KELLYS Carbon (1.5 tapered steerer)
main composition RITCHEY WCS Carbon Logic Zero 1.5 integrated
center composition SHIMANO Press-Fit BB71-41A
cranks SHIMANO Ultegra (18) R8000 Hollowtech II (52x36) - length 172.5mm (S - M), 175mm (L)
shifting SHIMANO Ultegra (18) Di2 ST-R8050 Dual Control
derailleur SHIMANO Ultegra (18) Di2 R8050
shifter SHIMANO Ultegra (18) Di2 R8050 (direct mount)
number of gears 22
cassette pinion SHIMANO Ultegra (18) CS-R8000-11 (11-28)
chain SHIMANO CN-HG701-11 (106 links)
brakes SHIMANO Ultegra (18) R8000 front / R8010 rear
brake levers SHIMANO Ultegra (18) Di2 ST-R8050 Dual Control
braided wheels MAVIC Ksyrium Elite wheelset
tires MAVIC Yksion Pro GripLink 25-622 (700 x 25C) folding
stem RITCHEY WCS Carbon Matrix C220 - diam 28.6mm / bar bore 31.8mm / 6° / length 90mm (S), 100mm (M), 110mm (L)
handlebars RITCHEY WCS Carbon Curve - diam 31.8mm / width 400m (S), 420mm (M), 440mm (L)
fi´zi:k microtex bar tape handles
seatpost RITCHEY WCS Carbon 1-Bolt monocoque - diam 30.9mm / length 300mm (S), 350mm (M), 400mm (L)
saddle fi´zi:k Arione R5 Manganese
Model year | 2018 |
Gears | 2x11 |
Groupset | Shimano Ultegra |
Material | carbon fiber |
Brakes | Road rim brakes |
product ID | 53901 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews