Kellys ARC 30 bike, white
Choose personal collection at the store and decide on the spot.
Kellys ARC 30 bike
Suitable for riding on roads and cycle paths after work or over the weekend. These bikes have a more comfortable geometry than sports bikes, but they have their limitations when it comes to equipment, which will need more frequent fine-tuning.
Frame |
KELLYS Endurance Concept - Aluminium alloy, tapered HT, internal routing
|
Shifting |
SHIMANO Sora ST-R3000 Dual Control
|
Derailleur |
SHIMANO Sora R3000 (direct mount)
|
Front derailleur |
SHIMANO Sora R3000 (braze on)
|
Chain |
KMC X9 (108 links)
|
Cranks |
SHIMANO Sora R3000 (50x34T) - length 170 mm (S), 175 mm (M - L)
|
Brakes |
TEKTRO
|
Brake levers |
SHIMANO Sora ST-R3000 Dual Control
|
Rims |
KELLYS Spark 622x15 (32 holes / riveted)
|
Hubs |
SHIMANO Claris 2400 (32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE Lugano K-Guard 25-622 (700x25C)
|
Seat post |
KLS Active - diameter 30.9 mm / length 350 mm (S - M), 400 mm (L)
|
Saddle |
KLS SlipStream cr-mo rails
|
Stem |
KLS Active Road - diam 28.6 mm / bar bore 31.8 mm / 6° / length 90 mm (S), 100 mm (M), 110 mm (L)
|
Handlebars |
KLS Active Road - diameter 31.8 mm / width 400 mm (S), 420 mm (M), 440 mm (L)
|
Grips |
KLS bar tape
|
Cassette pinion |
SHIMANO CS-HG300-9 (11-32T)
|
Bottom bracket |
SHIMANO BB-RS500
|
Headset |
FSA 1.5 semi-integrated
|
Sex | Men, Unisex |
Model year | 2022 |
Groupset | Shimano Sora, Shimano Claris |
Gears | 2x9 |
Brakes | Road rim brakes |
Wheel diameter | 28" |
Material | aluminium |
Colour | white |
Fork | Rigid |
Wheel material | Aluminium |
product ID | 174041 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.