Giant TCR Advanced Pro 0 Disc, model 2020
Fork: Advanced Composite, carbon post OverDrive 2, 12mm fixed axle
Handlebars: Giant Contact SL
Representative: Giant Contact SL
Seatpost: Giant Variant, carbon
Saddle: Giant Contact SL (Forward)
Shifting: SRAM Force eTap AXS, wireless electronic shifting, 2x12 gears
Derailleur: SRAM Force eTap AXS
Derailleur: SRAM Force eTap AXS
Brakes: SRAM Force eTap AXS, hydraulic
Brake levers: SRAM Force eTap AXS
Cassette: SRAM Force, 12 speeds, 10-28 teeth
Chain: SRAM Force D1
Cranks: SRAM Force D1 DUB, 48/35 tooth converters, Quarq DZero wattmeter
Middle composition: SRAM OAK, press fit
Rims: Giant SLR 1 Disc Composite WheelSystem, carbon rims, height 42 mm
Hubs: Giant SLR 1 Disc WheelSystem, 12mm fixed axles
Tip: Giant SLR 1 Disc WheelSystem
Tires: Giant Gavia AC 0, 700x25, tubeless
Accessories: RideSense ANT + / Bluetooth sensor
Model year | 2020 |
Gears | 2x12 |
Groupset | SRAM Force |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 107600 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews