Giant TCR Advanced 2 KOM bike, carbon
Giant TCR Advanced 2 KOM bike
Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding and training. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
Advanced-Grade Composite, 12x142 mm thru-axle, disc
|
Fork |
Advanced-Grade Composite, full-composite OverDrive steerer, 12x100 mm thru-axle, disc
|
Shifting |
Shimano 105
|
Derailleur |
Shimano 105
|
Derailleur |
Shimano 105
|
Cassette |
Shimano 105, 12-speed, 11-36T
|
Chain |
KMC X12L-1
|
Cranks |
Shimano 105, 34/50T XS, S: 170 mm, M, M/L: 172.5 mm, L, XL: 175 mm
|
Brakes |
Shimano 105 hydraulic, Giant MPH rotors [F] 160 mm, [R] 140 mm
|
Rims |
Giant P-R2, [F] 36mm, [R] 36mm
|
Spokes |
stainless
|
Tires |
Giant Gavia Course 1, tubeless, 700x28C, folding
|
Seat post |
Giant Variant, composite, -5/+15 mm offset
|
Saddle |
Giant Approach
|
Stem |
Giant Contact AeroLight XS: 80 mm, S: 90 mm, M: 100 mm, M/L, L: 110 mm, XL: 120 mm
|
Handlebars |
Giant Contact XS, S: 40 cm, M, M/L: 42 cm, L, XL: 44 cm
|
Bar tape |
Stratus Lite 2.0
|
Bottom bracket |
Shimano, press fit
|
Accessories |
tubeless prepared
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 2x12 |
Groupset | Shimano 105 |
Colour | carbon |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28\" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Max tire width | 33 mm |
product ID | 277429 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews