Fuji Transonic 2.3, model 2020
Fork: FC-440 full carbon w / tapered carbon steerer
Cranks: Shimano Ultegra, 52 / 36T
Middle composition: Praxis PF30 conversion bottom bracket
Derailleur: Shimano Ultegra, braze-on mount
Derailleur: Shimano Ultegra
Gear: Shimano Ultegra Dual Control, 11-speed
Cassette: Shimano 105, 11-30T
Chain: KMC X11 w / MissingLink
Wheels: Oval Concepts 527, 700c 18 / 24H rims
Tires: Vittoria Zaffiro Pro, 700 x 25c, 60tpi, folding
Brakes: Shimano Ultegra
Brake levers: Shimano Ultegra
Head composition: Integrated sealed bearing
Handlebars: Oval Concepts 790 Aero aluminum, 31.8mm clamp, 125mm drop / 75mm reach
Stem: Oval Concepts 790 Aero, 3D-forged, -17 degree w / integrated computer mount
Saddle: Oval Concepts X38 with pressure relief zone, cromo rail
Seatpost: Oval Concepts Transonic Aero, 300mm 46-52cm / 350mm 54-61cm
Weight: 8.14 kg
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano Ultegra, Shimano 105 |
Material | carbon fiber |
Brakes | Road rim brakes |
product ID | 78211 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews