Fuji SL Disc 2.5 Satin Fog Gray, model 2019
Fork: FC-440 carbon monocoque w / tapered carbon steerer, 12mm thru-axle dropout w / flat-mount disc system
Cranks: Oval Concepts 500, forged 6066 arms, M30 spindle, forged Praxis 52 / 36T rings
Middle composition: Praxis PF30 conversion bottom bracket
Derailleur: Shimano 105, braze-on mount
Derailleur: Shimano 105
Gear: Shimano 105 Dual Control Hydraulic, 11-speed
Cassette: Shimano 105, 11-30T
Chain: KMC X11 w / MissingLink
Wheels: Oval Concepts 324 Disc, centerlock hubs, 100x12mm & 142x12mm thru axles, 700c 24 / 28H rims
Tires: Vittoria Zaffiro Pro, 700 x 25c, 60tpi, folding
Brakes: Shimano 105 Hydraulic, 160/160 rotors
Brake levers: Shimano 105 Hydraulic
Head composition: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Handlebars: Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4 degree sweep
Predstavec: Oval Concepts 313, 3D-forged 6061 stem points, +/- 7 degree
Saddle: Oval Concepts 438, steel rail
Seatpost: Oval Concepts 905, carbon & alloy, 27.2mm diameter
Weight: tbd
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 78188 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
