Fuji Norcom Straight 2.1 Satin Carbon / Green, model 2019
Fork: FC-330 carbon aero monocoque w / 1 1/8 "" carbon steerer, integrated airfoil brakes
Cranks: Shimano Ultegra, 52 / 36T
Middle composition: Shimano, press fit BB86
Derailleur: Shimano Ultegra, braze-on mount
Derailleur: Shimano Ultegra, 11-speed
Gearing: Shimano SL-BSR1 bar-end TT shifters, 11-speed
Cassette: Shimano Ultegra, 11-28T, 11-speed
Chain: KMC X11L, 11-speed
Wheels: Oval Concepts 950 F, 700c 18 / 24H aero carbon-alloy rims
Tires: Vittoria Zaffiro Pro Slick, 700 x 23, 60tpi, folding
Brakes: TRP aero TTV
Brake levers: Oval 701 TT brake levers, forged alloy lever
Head assembly: FSA, 1 1/8 "" press fit top, integrated bottom bearing
Handlebars: Oval Concepts 750, alloy base bar w / 750 S-bend alloy extensions
Predstavec: Oval Concepts 760 Aero, forged 7050 stem body, aero faceplate cover, +/- 17 degree
Saddle: Oval Concepts 534T Tri, Dual Zone with synthetic cover, cromo rail
Seatpost: Oval Concepts, aero carbon, multi-position
Weight: 9.16 kg / 20.18 lbs
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano Ultegra |
Material | carbon fiber |
Brakes | Road rim brakes |
product ID | 78173 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews