FELT IA 10 gray, model 2019
Fork: Felt UHC Advanced carbon
Shifting: Shimano Dura-Ace R9160 TT/Tri Di2
Derailleur: Shimano Ultegra R8050 Di2
Derailleur: Shimano Ultegra R8050 Di2
Cassette: Shimano, 11 speeds, 12-28 teeth
Chain: Shimano, 11 speeds
Cranks: Vision TriMax Pro Tri BB30, 52/36 teeth (48/51cm - 165mm, 54/56cm - 170mm, 58cm - 172.5mm)
Headset: FSA IS integrated, 1.125"
Stem: Devox IAx, -6°, 90mm
Handlebars: Felt Bayonet 3 (48/51cm - 390mm, 54/8cm - 420mm)
Brakes: Vision TriMax / Shimano BR5810
Brake levers: Shimano Ultegra R8060
Bullets: Devox TTR3
Rims: Devox 35A
Spikes: Aero, stainless steel
Tires : Felt Aero TTR2, 700x23c
Seatpost: Felt UHC Advanced carbon, 300mm
Seat: ISM PS1.0
Weight: 9.4 kg
Gears | 2x11 |
Groupset | Shimano Dura-Ace, Shimano Ultegra |
product ID | 77443 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews