Corratec CCT EVO Dura Ace 2018, road bike
A road bike made of light carbon with an aerodynamic frame.
Frame: Corratec CCT Evo Material: Carbon UD 800T
Fork: Corratec Pro Control Fork Material: Carbon UD 800T
Brakes: Shimano Dura Ace Direct Mountfront
Stem: ZZYZX 6 Series 3D 6 Degree Material: Alloy
Handlebars: ZZYZX Carbon Racing Bar 420mm Material: Carbon
Seat: Corratec Carbon Saddle Material: Carbon
Seat post: ZZYZX Carbon Twin Bolt 27.2mm Outer diameter: 27.2mm Material: Carbon
Gear: Shimano Dura Ace R9100 52/36 Number of chainrings; Ratio: 2s; 52/36
Cassette: Shimano Dura Ace R9100 11s Number of pinions; Ratio: 11s; 11-12-13-14-15-17-19-21-23-25-28
Derailleur: Shimano Dura Ace R9100
Derailleur: Shimano Dura Ace R9100
Shifting: Shimano Dura-Ace R9100
Rims: ZZYZX Carbon 700c 45mmType of tires:clincherMaterial: Carbon
Tires: Continental CompetitionInside diameter: 28.00zollWidth:25mmType of tires:clincher
Converter gears: 2s; 52/36
Cassette transmissions: 11s; 11-12-13-14-15-17-19-21-23-25-28
Model year | 2018 |
Gears | 2x11 |
Groupset | Shimano Dura-Ace |
Material | carbon fiber |
product ID | 52362 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews