Cannondale CAAD 12 Disc 105 2019 SLV road bike
Fork: CAAD12 Disc, Ballistec Carbon, SAVE, 1-1/8" to 1-1/4", integrated crown race, 12x100 mm thru-axle
Cranks: Cannondale Si, BB30 w / FSA rings, 52/36
Center composition: Cannondale BB30
Derailleur: Shimano 105 7000
Derailleur: Shimano 105 7000, Brage-on
Shifters: Shimano 105 7000, 2x11
Cassette: Shimano 105, 11-30, 11-speed
Chain: Shimano HG601, 11-speed
Brakes: Shimano 105 7070 hydro disc, 160/160 mm RT56 rotors
Brake levers: Shimano 105 7020 hydro disc
Rims: RD 2.0, 24h front, 28h rear
Hubs: Formula RX-512 12x100 front, CX-22 QR rear
Wires: Stainless Steel, 14g
Tires: Vittoria Zaffiro Pre Slick, 700 x 25c
Handlebars: Cannondale C3, 6061 Alloy, compact
Stem: Cannondale C3, 6061 Alloy, 31.8, 7°
Head assembly: CAAD12, 1-1/4" lower bearing, 25 mm top cap
Saddle: Prologue Nago RS STN
Seat post : Cannondale C3, 6061 Alloy, 25.4 x 350 mm (44-56), 400 mm (58-63)
Weight: 9 kg (56cm)
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 75484 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews