Rock Machine Manhattan 70-29 bike, night storm blue
Rock Machine Manhattan 70-29 bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
Alloy Al-6061 T6 Custom tubing, Fun Ride Geometry, Shark Spine EVO2 29er, BB BSA 73 mm, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
RST Gila, 1-1/8", 100 mm travel
|
Shifting |
Shimano Altus SL-M315 RapidFire Plus, 2x8-speed
|
Derailleur |
Shimano Altus RD-M310-L
|
Derailleur |
Shimano FD-M315-TS, Top Swing, Dual-Pull
|
Cassette |
Shimano CS-HG200-8, 12-32T
|
Chain |
KMC Z8.3
|
Cranks |
Samox SAC38731SS, 36-22T
|
Brakes |
Clarks CLOUT1, hydraulic disc brake
|
Brake discs |
SHIMANO SM-RT10, 160mm/160mm
|
Rims |
Stars J20S, 32H
|
Front hub |
Shimano HB-TX505, 32H, Center Lock, QR Type
|
Rear hub |
Shimano FH-TX505-8, 32H, Center Lock, M10x135 mm, QR Type
|
Spokes |
Sapim Galvanized Black
|
Tires |
WTB Ranger Comp, 29x2.00
|
Seat post |
ONE1 Alloy, SP C207, 30.9 mm
|
Saddle |
Selle Royal Flex
|
Stem |
TDS-C342 Alloy, 31.8 mm, e45, +3°
|
Handlebars |
ONE1 Alloy, MTB AL-325BT, 6° upsweep, 9° backsweep, 25 mm rise, 680 mm, 31.8 mm
|
Grips |
Velo
|
Headset |
FSA No.10 Semi-Cartridge, 1-1/8"
|
Bottom bracket |
Shimano BB-UN101 122.5 mm, BSA, shell 73 mm
|
Pedals |
Aluminum Caged with reflector
|
Sex | Men, Unisex |
Model year | 2026 |
Gears | 2x8 |
Groupset | Shimano Altus |
Colour | night storm blue |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 341685 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews