Kellys Swag 30 29/27.5 bike, garnet red
Kellys Swag 30 29/27.5 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
Frame |
KELLYS Enduro / Think Link® suspension system, 150 mm rear travel, tapered HT, internal routing, ISCG 05, mullet 29" / 27.5" wheelset, 12x148 mm Boost thru axle
|
Fork |
RockShox Yari RC (29") Boost, 160 mm, DebonAir / Motion Control / Maxle Stealth 15 mm thru axle
|
Shock |
RockShox Deluxe Select+ RT, DebonAir / Open-Threshold (210 x 55 mm)
|
Shifting |
Shimano SLX SL-M7100-IR Rapidfire Plus (I-Spec EV)
|
Derailleur |
SHIMANO SLX M7100 (direct mount)
|
Cassette |
Shimano CS-M6100-12 (10-51T)
|
Chain |
SHIMANO CN-M6100 (114 articles)
|
Cranks |
SHIMANO Deore MT510-1 (32T) - length 175 mm
|
Brakes |
Shimano Deore BL-M6100/BR-M6100 hydraulic disc, 180 mm/180 mm
|
Rims |
KLS Segador 30 SL Disc (front 622 x 30 / rear 584 x 30 / 32 holes)
|
Hubs |
SHIMANO Deore MT410-B Disc Center Lock (15x110 mm / 12x148 mm / 32 holes)
|
Tires |
F: Schwalbe Nobby Nic Evo Super Trail 29x2.35" TLE, ADDIX SpeedGrip
R: Schwalbe Nobby Nic Evo Super Trail 27.5x2.35" TLE, ADDIX SpeedGrip |
Seat post |
KS Rage-i Remote Telescopic - diam 30.9 mm / length 495 mm, stroke 170 mm
|
Saddle |
fi'zi:k Taiga, S-alloy rails
|
Stem |
RACE FACE Chester 35 - diam 28.6 mm / bar bore 35 mm / 0° / length 40 mm
|
Handlebars |
Race Face Chester 35 RiseBar - diam 35 mm / rise 35 mm / width 780 mm
|
Grips |
KLS Poison
|
Headset |
FSA 1.5 integrated
|
Bottom bracket |
Shimano PressFit BB71-41A
|
Pedals |
KLS Master
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Size | M, L |
Colour | garnet red |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" front/27.5" rear |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 312876 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews