Kellys Spider 30 27.5 bike, black
Kellys Spider 30 27.5 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
KELLYS Alutec RRC 27.5 - Race Ready Concept
|
Fork |
SR SUNTOUR XCE28 DS (27.5), 100 mm, coil spring
|
Shifting |
SHIMANO ST-EF500-8 EZ-fire Plus
|
Derailleur |
SHIMANO TX800 (direct mount)
|
Derailleur |
SHIMANO TY600 (34.9 mm)
|
Cassette |
SHIMANO CS-HG200-8 (12-32T)
|
Chain |
KMC Z8 (108 links)
|
Cranks |
SHIMANO TY301 (42x34x24T) - length 170 mm (S), 175 mm (M)
|
Brakes |
Mechanical Disc
|
Brake levers |
SHIMANO ST-EF510 EZ-fire Plus
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KLS Draft Disc 584x21 mm (32 holes)
|
Hubs |
KLS Firework Disc (32 holes)
|
Spokes |
steel
|
Tires |
IMPAC Ridgepac 54-584 (27.5x2.10")
|
Seat post |
KLS Active - diam: 30.9 mm/length: 350 mm (S), 400 mm (M)
|
Saddle |
KLS Sentinel 2
|
Stem |
KLS Active - diam: 28.6 mm/bar bore: 31.8 mm/8°/length: 75 mm
|
Handlebars |
KLS Active RiseBar - diam: 31.8 mm/rise: 18 mm/width: 660 mm (S), 680 mm (M)
|
Grips |
KLS Advancer
|
Headset |
semi-integrated
|
Bottom bracket |
cartridge (122 mm)
|
Pedals |
ALLOY
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 3x8 |
Groupset | Shimano Tourney |
Colour | black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Mechanical disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 224377 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
