GT Sensor Sport ST 29 bike, gloss june gloom/black
Choose personal collection at the store and decide on the spot.
GT Sensor Sport ST 29 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
Frame |
Sensor 29" Frame, 130 mm Travel, BSA 73 mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, UDH, 185x50 mm Trunnion Shock Mount, ISCG05
|
Fork |
RockShox Recon Silver, 140 mm, 15x110 mm, Tapered Steerer, 42 mm OffSet
|
Shock |
X-Fusion 02 Pro RL, 185x50 mm Trunnion, Rebound and Lockout
|
Derailleur |
MicroSHIFT Advent X
|
Cassette |
Microshift Advent X, 11-48T
|
Chain |
KMC X10, 10-speed
|
Cranks |
Prowheel MPX, 32T
|
Brakes |
Tektro M275 Hydro Disc, 180/180 mm discs
|
Rims |
WTB STX i25 TCS, 32h, Tubeless Ready
|
Seat post |
TranzX Dropper, Ø 31.6 mm, (S/M: 120 mm, L/XL: 130 mm)
|
Saddle |
WTB Silverado
|
Stem |
GT Alloy, 45 mm
|
Handlebars |
GT Alloy Riser Bar, 30 mm rise, 780 mm width, 5° rise, 8° back
|
Headset |
FSA No.42
|
Bottom bracket |
Shimano BSA
|
Shift levers |
Microshift Advent X, 10-speed
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x10 |
Groupset | microSHIFT ADVENT X |
Colour | gloss june gloom/black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 140 mm |
Shock | Air |
Rear travel | 130 mm |
Telescopic seat post | yes |
product ID | 204264 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews