GT Aggressor Comp 29 bike, gray
GT Aggressor Comp 29 bike
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
GT 6061 T6 Aluminium Frame, Triple Triangle w/ Floating Seat Stays, Forged Drop-outs w/ Disc Brake Mounts, Zero Stack 1 1/8" Head Tube, 27.5/29" Wheels
|
Fork |
SR Suntour XCT, 80 mm, Coil
|
Shifting |
MicroSHIFT MEZZO TS39-8, 3x7
|
Derailleur |
microSHIFT RD-M26C
|
Derailleur |
microSHIFT FD-M20M
|
Cassette |
Sunrace, 14-34, 7-speed
|
Chain |
KMC Z7, 7-speed
|
Cranks |
Prowheel Alloy, 42/34/24
|
Brakes |
Tektro Mech Disc Brakes, 160/160 mm Rotors
|
Brake levers |
Alloy V-type
|
Rims |
WTB SX19, 32H
|
Spokes |
Stainless Steel, 14 g
|
Tires |
WTB Ranger Comp, 27.5/29 x 2.25", DNA Compound
|
Seat post |
GT All Terra Two Bolt Alloy
|
Saddle |
GT MTB
|
Stem |
GT All Terra, 6061 Alloy, 31.8, 8°
|
Handlebars |
GT All Terra Alloy Riser, 25 mm Rise, 8° Sweep, 6° Rise, 720 mm Width
|
Grips |
GT Statement
|
Headset |
Semi-integrated, Sealed Cartridge
|
Bottom bracket |
Cartridge, square taper
|
Pedals |
GT Slim Line Flat Pedal
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 3x7 |
Groupset | microSHIFT Mezzo |
Size | S, M, L, XL |
Colour | grey |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Mechanical disc brakes |
Fork | Spring |
Fork travel | 80 mm |
Telescopic seat post | no |
product ID | 213782 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews