Giant Anthem Advanced Pro 3 29 bike, amber glow
Giant Anthem Advanced Pro 3 29 bike
Full-carbon, full-suspension, light and super-fast XC bike suitable for demanding passages and fast descents.Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
Advanced-Grade Composite front and rear triangles, 100 mm FlexPoint Pro suspension, 12x148 mm thru-axle
|
Fork |
RockShox Sid, 110 mm, Boost 15x110, 44 mm offset, remote lockout, custom tuned for Giant
|
Shock |
Fox Float DPS Performance, 165/45, custom tuned for Giant
|
Shifting |
Shimano Deore SL-M6100, 1x12
|
Derailleur |
Shimano Deore RD-M6100
|
Cassette |
Shimano Deore M6100, 10-51T
|
Chain |
KMC X-12
|
Cranks |
Praxis Cadet, 32T, S: 170 mm, M: 175 mm, L: 175 mm, XL: 175 mm
|
Brakes |
Shimano Deore MT410, hydraulic, Shimano RT-26 rotors, front: 180 mm, rear: 160 mm
|
Brake levers |
Shimano Deore MT401
|
Wheels |
Giant XCR 2 29 Carbon WheelSystem
|
Tires |
Maxxis Recon Race 29x2.4, foldable, TLR, EXO, tubeless
|
Seat post |
Giant Contact Switch dropper, remote S: 125 mm travel / 30.9 x 395 mm; M: 125 mm travel / 30.9 x 395 mm; L: 150 mm travel / 30.9 x 440 mm; XL: 150 mm travel / 30.9 x 445 mm
|
Saddle |
Fi'zi:k Antares R7 with S-Alloy rails
|
Stem |
Giant Contact SL XC, 35 mm, S: 60 mm, M: 70 mm, L: 70 mm, XL: 70 mm
|
Handlebars |
Giant Contact XC Flat, composite, width 760 mm x 35 mm
|
Grips |
Giant XC Pro S: 32 mm, M: 32 mm, L: 34 mm, XL: 34 mm
|
Bottom bracket |
Shimano, press fit
|
Accessories |
tubeless prepared
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x12 |
Groupset | Shimano Deore |
Colour | amber glow |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 110 mm |
Shock | Air |
Rear travel | 100 mm |
Telescopic seat post | yes |
product ID | 217331 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews