Yeti SB115 C1 Kit Glacier 29 bike, glacier
Yeti SB115 C1 Kit 29 bike
Yeti has created a bike that takes the best of other models. It quickly climbs hills, but at the same time it can easily handle fun and challenging trails. The SB115 frame is made of a material called C/Series carbon fiber and is thus High modulus carbon, which is a little heavier than TORQ technology. The bike is so light but stiff at the same time. The frame uses Switch Infinity suspension technology, which creates a feeling of infinite travel, even though it is only 115 mm.Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Air fork
The best option in terms of weight and comfort. Provides more adjustment options (rebound, compression). Requires regular service - the service cycle is specified by the manufacturer.
Air shock
When buying a bicycle, it is necessary to set it to the required pressure according to the weight of the rider (specified by the manufacturer of the shock absorber, a shop assistant can also help you). Can provide several ride and suspension adjustment options. Requires regular check-up and is also more demanding to service. Compared to the spring one, it is significantly lighter.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Frame |
Yeti SB115 C/Series carbon fiber
|
| Fork |
Fox 34 Performance, 130 mm
|
| Shock |
Fox Float DPS Performance, 115 mm
|
| Derailleur |
Shimano SLX
|
| Cassette |
Shimano SLX, 10-51T
|
| Chain |
Shimano SLX
|
| Brakes |
Shimano Deore 4 piston
|
| Brake levers |
Shimano Deore
|
| Tires |
front: Maxxis Minion DHF 29x2.5" EXO
rear: Maxxis Aggressor 29x2.3" EXO |
| Seat post |
FOX Transfer, 150 mm
|
| Saddle |
WTB Silverado
|
| Handlebars |
Race Face AEFFECT R, 35 x 780 mm
|
| Bottom bracket |
Shimano XT BB92
|
| Shift levers |
Shimano SLX
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | Shimano SLX |
| Colour | glacier |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 130 mm |
| Shock | Air |
| Rear travel | 115 mm |
| Telescopic seat post | yes |
| product ID | 143877 |
| Size | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| Height (cm) | 147.5 - 160 | 155 - 170 | 165 - 180 | 178 - 190 | 185 - 200 | 196 - 210 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
-32% BMC Fourstroke THREE 29 bike, sparkling dark petrol/sand
3,399 €
-32%
RRP 4,999 €
-13% Superior XF 979 TR 29 bike, matte trooper green/black
3,699 €
-13%
RRP 4,699 €
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
Sale -28% POC Kortal Race MIPS helmet, fluorescent orange AVIP/matte uranium black
from 197 €
-28%
RRP 324 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews