Rock Machine Blizzard 70-297 bike, matte red/black
Rock Machine Blizzard 70-297 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
Alloy Al-6061 T6 Custom tubing, BF1604, Floating Pivot Suspension, 160 mm travel, Enduro Advanced Geometry, Shark Spine EVO 27.5, Boost 148x12, BB92 Press Fit, Inner Cable Routing, Adjust. seatpost ready
|
Fork |
DVO ONYX SC D2, Tapered, Air, 15x110 mm axle, 160 mm travel
|
Shock |
DVO JADE X COIL
|
Shifting |
Shimano Deore SL-M6100-IR RapidFire Plus, 12-speed
|
Derailleur |
SHIMANO DEORE RD-M6100 Shadow Plus
|
Cassette |
SHIMANO CS-M6100-12, 10-51T
|
Chain |
Shimano DEORE CN-M6100
|
Cranks |
SHIMANO FC-M6100, 32T
|
Brakes |
SHIMANO BL-M7100/BR-M7120, hydraulic disc brake, SM-RT64, 203 mm
|
Rims |
WTB ST i29, 32H
|
Front hub |
SHIMANO SLX HB-M7110-B, 32H, CENTER LOCK, 15x110 mm THRU Type AXLE
|
Rear hub |
SHIMANO SLX FH-M7110-B, 32H, CENTER LOCK, 12x148 mm THRU Type AXLE
|
Spokes |
Sapim Race, Stainless Black
|
Front tyre |
WTB Vigilante TCS Tough/High Grip, 29x2.50"
|
Rear tyre |
WTB Trail Boss TCS Tough/Fast Rolling, 27.5x2.60"
|
Seat post |
ONE1 Alloy, MT171, dropper post 170 mm, 30.9 mm
|
Saddle |
WTB Volt Comp
|
Stem |
Race Face Aeffect R Alloy, 35 mm, 0°
|
Handlebars |
Race Face Turbine R 35, 20mm rise, 780mm, 35mm
|
Grips |
VELO, Lock-On
|
Headset |
FSA Orbit 1.5 No.57E, Zero Stack, 1-1/8“x1.5“
|
Bottom bracket |
SHIMANO BB-MT500PA PressFit, shell 41x92 mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Size | M, L, XL |
Colour | matte red/black |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" front/27.5" rear |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Spring |
Rear travel | 160 mm |
Telescopic seat post | yes |
product ID | 289810 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews