Orbea OIZ M10 TR 29 bicycle, grey/black
Orbea OIZ M10 TR 29 bicycle
Frame |
Orbea Oiz Carbon OMR AlloyLink Boost PF Taper UFO2 I-Line
|
Fork |
Fox 34 Float SC Factory 120mm FIT4 Remote-Adj Push-Unlock QR 15x110
|
Shock |
Fox i-line DPS Factory 120 mm Remote Push-Unlock Evol Kashima custom tune 190x45 mm
|
Derailleur |
Shimano XT M8100 SGS Shadow Plus
|
Cassette |
Shimano CS-M8100, 10-51T, 12-speed
|
Chain |
Shimano M7100
|
Cranks |
Shimano XT M8100 32t
|
Brakes |
Shimano XT M8100 Hydraulic Disc
|
Wheelset |
Orbea OC3 Carbon 30c Tubeless Ready
|
Tires |
Maxxis Rekon Race 2.35" 120 TPI Exo TLR
|
Seat post |
OC2 Dropper, Ø 31.6 mm, 125 mm stroke
|
Saddle |
Fizik Taiga S-alloy rail
|
Stem |
OC3 31.8mm interface -8o
|
Handlebars |
OC3 Carbon Flat, Ø 31.8 mm, width 760 mm
|
Headset |
Acros Alloy 1-1/8 - 1-1/2" Integrated
|
Rear shock lock |
OC Squidlock 3-position
|
Shift levers |
Shimano XT M8100 I-Spec EV
|
Chain guide |
Orbea OC chainguide
|
Model year | 2022 |
Gears | 1x12 |
Groupset | Other |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | front 120 mm / rear 120 mm |
Shock | Air |
product ID | 195234 |
Road
Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
---|---|---|---|---|---|---|---|
Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews