Mondraker Sly R 29 electric bike, marlin blue/racing silver/obsidian grey
Mondraker Sly R 29 electric bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
Alloy Stealth Evo 6061, optimized Zero Suspension System, 150 mm travel, Forward Geometry, removable internal battery, Boost 12x148 mm rear axle, tapered head tube, one-piece top link, HHG internal cable routing, sealed bearings with capacity MAX load capacity, 15 mm increased axles, integrated dropout speed sensor, exclusive plastic engine covers.
|
Fork |
Rockshox Psylo Gold RC, 160 mm, 3 positions, Debon Air, tapered head tube, Boost 15x110 mm axle, 35 mm steel sheath, 44 mm offset. Settings: Low speed compression adjustment for lockout, rebound, air preload
|
Shock |
Rockshox Deluxe Select+, 185x55 mm, Trunnion upper mount, 30x8 mm lower bushings
|
Shifting |
SRAM Eagle AXS Under MMX, 12s
|
Derailleur |
SRAM S1000 Eagle AXS T-Type, 12s
|
Cassette |
SRAM XS-1270, 10-52T, T-Type 12s
|
Chain |
SRAM GX Eagle T-Type, 12s, Powerlock
|
Cranks |
E.13 Helix Core E*Spec Plus, all sizes: 160 mm/SRAM X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
|
Brakes |
SRAM DB8 stealth, 4-piston caliper, 200 mm/200 mm Centerline one-piece brake disc with 6 IS bolts, organic pads with steel backing
|
Rims |
Mavic E-CrossRide 29, internal width 30 mm, welded, PFP, tubeless ready, 28 spokes
|
Front hub |
Mavic, Boost 15x110 mm, 6 bolt IS
|
Rear hub |
Mavic, Boost 12x148 mm, Ratchet ID360 ratchet system, 6 IS bolts, XD freehub
|
Rear tyre |
Maxxis Minion DHR II 29x2.5 WT, TR, 3C MAXX TERRA compound, EXO+ protection, 60 TPI, folding bead
|
Seat post |
ONOFF Pija internal telescopic, diameter 31.6 mm, 1X remote lever with bearing, size S: 140-115 mm (388-235 mm), size M: 160-135 mm (428-255 mm), size L: 180-155 mm (468-275 mm), size XL: 210-185 mm (528-305 mm)
|
Saddle |
FIZIK Terra Aidon X5 145 mm
|
Stem |
ONOFF S3 30 mm 0º, forged alloy 6061, barbore 31.8 mm
|
Handlebars |
ONOFF S3 1.0 alloy 6061, rise: 25 mm, width: 800 mm, backsweep 8º, upsweep 5º, barber 31.8 mm. Size L and XL: rise 1.5.
|
Drive |
Bosch Performance Line SX (25 Km/h) GEN4 SMART SYSTEM Diagonal
|
Display |
Bosch Mini Remote / Bosch System Controller
|
Battery |
Bosch Compact Powertube 400 Wh
|
Front tyre |
Maxxis Minion DHF 29x2.5 WT, TR, 3C MAXX GRIP compound, EXO+ protection, 60 TPI, folding bead
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | SRAM GX |
Size | S, M, M/L, L, XL |
Colour | marlin blue/racing silver/obsidian grey |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 160 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 315824 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews