Mondraker Foxy R 29, model 2020
Fork: Fox 36 Float 29 GRIP 3Pos Performance Boost, stroke 160 mm
Muffler: Fox Float DPX2 LV EVOL Performance, 205x62.5 mm. Settings: 3-position compression, low-speed rebound, air preload, Trunnion mount, 22.2x10 mm sliding bushes
Head composition: ONOFF Saturn tapered ACB
Stem: ONOFF Sulfur FG30 0º
Handlebars: ONOFF Sulfur 1.0, width 780mm
Grips: Onoff Twin, 1lock-on, 135 mm
Seatpost : ONOFF Pija internal 1x lever, telescopic
Saddle: Mondraker Foxy R 29 Design
Front brake: SRAM G2, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
Rear brake: SRAM G2, oversized 4-piston caliper, Centerline 180mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
Brake levers: SRAM G2, tool-free reach adjust
Rims: DT Swiss E1900 Spline 29, rim width 30 mm, entwined set
Spike: DT Competition Straight Pull
Front hub: DT 370, axle 15x110 mm
Rear hub: DT 370, axle 12x148 mm, XD walnut
Front tire: Maxxis Minion DHF 29x2.5 WT, Tubeless ready, 3C MAXX TERRA compound, EXO protection, 60TPI, folding bead
Rear tire: Maxxis Aggressor 29x2.3, Tubeless ready, dual compound, EXO protection, 60TPI, folding bead
Cranks: Truvativ Descendant 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S / M size: 170 mm, L / XL size: 175 mm
Converters: 32T, steel, X-Sync 2
Middle composition: SRAM OAK BSA 73 mm
Chain: SRAM NX Eagle
Derailleur: SRAM GX Eagle X-Horizon Type 3 1x12
Gear: SRAM GX Eagle Trigger right 12 speeds
Cartridge: SRAM Eagle XG-1275 10-50 teeth, 12 speeds
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 106668 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews