Mondraker Foxy Carbon XR MIND 29 bike, racing silver/yellow
Mondraker Foxy Carbon XR MIND 29 bike
Bikes for those who want light weight, 100% functionality at a professional level and will settle only for the best. Frames made of extra light alloys or carbon are complemented by top components and technologies.
Frame |
Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, Carbon Monoblock upper link, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. * Geometry kit included. MIND System (EU only)
|
Fork |
Öhlins RXF 36 M.2 29, 170 mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110 mm axle, offset 44 mm. Settings: high speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber. Fork settings: C20 R40
|
Shifting |
Sram Eagle AXS Rocker paddle, 12-speed
|
Derailleur |
Sram X01 Eagle AXS, roller bearing clutch, cage lock, 1x12, X-Actuation 1:1
|
Cassette |
Sram XG-1295, 10-52T, 12-speed
|
Chain |
Sram GX Eagle, 12-speed, Powerlock
|
Cranks |
Sram X01 Eagle, Boost, DUB axle, Direct mount chain ring, S/M: 170 mm, L/XL: 175 mm
|
Brake levers |
Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjustment
|
Rims |
e*thirteen Race Carbon Enduro IW30, Hookless carbon rim, 30 mm internal width, tubeless ready, 28 spokes
|
Front hub |
e*thirteen Boost 15x110 mm, triple-sealed, fully machined aluminum, IS 6 bolts
|
Rear hub |
e*thirteen Boost 12x148 mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, XD freehub
|
Spokes |
e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers
|
Tires |
front: Maxxis Minion DHF 29x2.5 WT, TR, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding
rear: Maxxis Minion DHR II 29x2.4 WT, TR, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding |
Seatpost |
Onoff Pija dropper internal, Ø 31.6mm, S: 405x95-125 mm, M: 458x120-150 mm, L-XL: 498x140-170 mm
|
Saddle |
SDG BEL-AIR 3.0, LPU foam, steel rails
|
Stem |
Onoff Krypton FG 30mm, CNC, Ø 31.8 mm barrel
|
Handlebars |
Onoff Krypton Carbon 1.0, rise 25 mm, width 800 mm, 9º backsweep, 5º upsweep, Ø 31.8 mm barbore
|
Headset |
Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, Internal cable routing
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | SRAM X01 |
Colour | racing silver/yellow |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 170 mm |
Shock | Air |
Rear travel | 150 mm |
Telescopic seat post | yes |
product ID | 206673 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews