Mondraker FOXY CARBON RR 27,5, flame red / light blue, model 2018
-10% Mondraker Raze Carbon R 29 bike, racing silver/orange
from 4,499 €
-10%
RRP 6,799 €
New model -5% Rock Machine Whizz FS I 90 AXS 29 bike, panama yellow
5,199 €
-5%
RRP 5,499 €
New model Rock Machine Whizz FS I 90 AXS 29 bike, matte deep ocean blue
from 4,999 €
RRP 5,499 €
weight: 13.10 kg
frame: foxy 27,5 stealth air full carbon structure, zero suspension system, forward geometry, aluminum csc upper link with carbon bridge, boost 12x148mm rear axle, bsa 73mm bottom bracket, dedicated 1x drivetain design, tapered head tube, hhg internal cable routing , enduro max sealed bearings, mudguard for shock, iscg 05, custom chainstay protector, carbon fabric protector in the diagonal tube, 150mm of travel. optional geometry kit.
fork: fox 34 float 27.5 grip performance evol, 150mm, 3 positions lever with intermediate positions in low-high-speed compression, tapered steerer tube, 15x110mm axle. settings: rebound, compression adjustment at high-low-speed to lockout, air preload.
head composition: onoff saturn tapered for 1-1-8 ”-> 1-5” head tube. top bearing 41x30.2x7x45? x45 ?, bottom 51.9x40x8x45? x45 ?.
shifter: sram gx eagle type 3 with roller bearing clutch and cage lock, 1x12s, long cage, x-horizon system.
derailleur: -
gearing: sram trigger gx eagle 12s, x-actuation, zero loss technology.
brake levers: shimano xt m8000, servo wave stem adjustment, lever reach adjustment.
cranks and guides: raceface aeffect 12s, molded aluminum 6066, 170mm crank arm length in sm size and 175mm in l-xl size
middle composition: race face x-type, sealed bearings.
handlebars: mondraker 6061 aluminum 6061 double-tapered. exclusive design for foxy carbon rr, height 20mm, width 780mm, 9? backsweep, 5? upsweep, diameter 31.8mm.
stem: onoff stoic fg 30mm. molded aluminum 6061, handlebar diameter 31.8mm.
pedals: -
seatpost: onoff pija dropper 31.6mm, internal hose guide. size s: 337x100mm, size ml-xl: 387x125mm.
saddle: sdg fly mtn, high-density pu, steel rails, cordura sides.
front hub: mavic boost axle 15x110mm, sealed bearings, is 6 bolts mount.
rear hub: mavic, boost axle 12x148mm, sealed bearings, ts-2 freehub for xd, is 6 bolts mount.
chain: sram gx eagle 12s.
cassette: sram xg-1275 10-50t, xd freehub for 12s.
wires: mavic steel, straight-pull.
rims: mavic xa 27,5, tubeless ready, internal width 25mm, asymmetrical rim, hookless, 24 spokes.
tires: maxxis high roller ii 27'5 x 2.3 tubeless ready, dual compound, exo protection, 60tpi, folding
27.5” wheels
Universal size for a wide range of bicycles. The advantage is better cross-country ability, higher traction and comfort, and still good dexterity. Slightly heavier.
| Model year | 2018 |
| Gears | 1x12 |
| Groupset | Shimano XT, SRAM GX |
| product ID | 53119 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews